The urge for environmentally friendly products is expanding in construction across the spectrum, and plastering materials are no exception. Cement, like steel and other industrial materials, is a major source of greenhouse emissions. This is largely due to the immense amount of carbon dioxide created during its manufacturing. But in the case of Gypsum, it is obtained from mine, and also the raw material and power required to operate is lower.
Whytal Gypsum Plaster is the best material for wall gypsum plastering, however not every brand provides the best gypsum plaster. There’s a significant chance that some brands already utilize synthetic gypsum in some capacity, and it’s not suitable for wall plastering.
The finest plastering solution is Whytal Gypsum plaster. Indeed, it not only reduces carbon dioxide emissions but also protects the environment. Gypsum plaster is more practical and can be used in place of sand cement mix and putty for plastering because of its durable and energy-saving properties.
To begin with, gypsum plaster is one of the most widely utilised plastering materials in the building industry. It has a good environmental impact. It also signifies a long-lasting and eco-friendly product. Gypsum plaster is now an essential component of building construction and repair. This is especially true in the case of environmentally friendly homes. In reality, sustainable housing attempts to produce healthier homes that are environmentally friendly and energy-efficient.WHYTAL Gypsum Plaster is a natural and eco-friendly product that has been approved by the IGBC (Indian Green Building Council).
Gypsum Has Small Carbon Print
Similarly, gypsum produces less carbon dioxide throughout the manufacturing process. It also has a lower impact on the environment. As a result, your construction initiatives will be more sustainable. In other words, as compared to bricks and concrete blocks, gypsum has a low carbon impact.
Dampness and moisture are quite prone to penetrate dwellings, particularly in coastal or tropical settings, or in older structures with exterior breaches. While it is impossible to prevent it, ventilation and air quality may be maintained. Another layer of protection and resistance to ceiling moisture is provided by the Gypsum plaster. As a place like Kerala with a tropical climate Whytal gypsum plaster is safe to use and also best to keep your construction cost reduced.
Protect from fire
Gypsum plaster can guard against fire threats to gridworks and wires. In such conditions, fire-resistant can provide enough resistance. They’re great for safely installing smoke alarms, water sprinklers, and heat detectors to warn of and defend against fire threats. When a fire comes into touch with gypsum, the first thing that happens is that water, in the form of steam, comes out of it. The gypsum continues to resist heat even after the water has evaporated. Gypsum has high heat resistance.
Whytal gypsum is lightweight gypsum plaster. It can be used to apply on internal surfaces by hand or by machine. It dries to a bright white, smooth, smooth finish with high impact resistance. Gypsum is a lightweight construction material with high strength and low density. This reduces the weight of plastering by 30%, increasing the structural strength of high-rise structures.
As compared to the more conventional method of plastering the use of gypsum plaster saves time and money, lowering project costs. Because sand is in short supply and the cost of cement has grown expensive, cement plaster is more expensive than gypsum plaster. Also, Cement plaster application is a time-consuming technique that raises project costs. With a single coat application, and time-saving, during the application, the percentage of the waste is minimal. The use of gypsum plaster saves time and decreases the total project cost.
To summarize, Whytal gypsum plaster has the following characteristics:
Eco-friendly: Reduces carbon emissions and has no negative impact on the environment. IGBC approved.
Resistant: To fire, dampness, and sound.
Lightweight: It is easy to apply and also decreases building weight.
Economic: Allows for the reduction of time, expenses, and energy use during manufacture, transportation, and application.